EN
Contact Us
The smart bag market is growing. Most products in it add technology as a feature. Kingsons builds it in as a foundation — 29 years of engineering investment, 500+ active patents, and an 80-person R&D team that has developed, tested, and commercially launched the most comprehensive range of technology-integrated bags available for OEM. If your next product needs to do something a standard bag cannot, this is where it starts.
Technology failures are the most commercially damaging category of product review. A broken zip is a quality complaint. A USB port that stops working at month two, a vacuum valve that leaks back to ambient pressure overnight, or an RFID lining that leaves signal gaps at the seam edge — these are product failures. And they almost always originate in the same place: engineering decisions made at the OEM production stage that prioritised ease of manufacture over performance over time.
Kingsons has been engineering technology into bags for over a decade. The failures listed above are not hypothetical — they are the failure modes Kingsons’ R&D team has specifically engineered against in every tech system it produces.
The quality of the technology component itself determines the maximum performance the finished product can achieve. Kingsons specifies components to defined technical standards across every tech system: IP54 port housing rated for 500+ plug cycles. Dual-seal one-way vacuum valves batch-tested for 24-hour hold at 50kPa. RFID-blocking linings independently tested at 99.99% shielding effectiveness. MiaSolé CIGS solar panels at 17.4% conversion efficiency. These standards are documented, testable, and available for OEM clients to verify.
The interface between a technology component and a textile structure is where most tech bag failures originate. A USB cable in an unguided routing channel develops stress fractures at uncontrolled bend points. A solar panel bonded without flex compensation delaminates as the bag flexes in daily use. An RFID lining with an unshielded seam leaves a signal path open that negates the lining’s effectiveness. Kingsons’ integration engineering defines each interface as a specific engineering problem with a specific structural solution — cable channels with controlled bend radii, flex-compensated panel bonding systems, fully sealed RFID compartment geometry.
Technology functions must be tested on every unit. Not sampled. A USB port that passes a batch inspection but fails in the field is a production defect — it affects your product’s review score and your customer’s trust. Kingsons’ quality control process includes 100% functional testing of all tech components per production run: port continuity, vacuum valve integrity, RFID shielding confirmation, QI coil function. Defect rates are documented per run and available to OEM clients.
Kingsons’ smart tech range is built around five independently developed, independently patented technology systems. Each has a dedicated sub-page with full technical specification.
Six independent, patented security layers: double-layered explosion-proof zipper, hidden back-access panel, retractable steel-wire lock, TSA combination lock, RFID-blocking silver-fibre lining, and Level 5 cut-resistant fabric. All six integrated in the ClickPack Pro — internationally crowdfunded, commercially launched. Available for OEM integration from 2 to 6 security layers per brief.
Three charging architectures for OEM integration: external USB port with internal power bank pocket (USB-A, USB-C Power Delivery, or dual-port), Qi wireless charging pad (1.2, 5W), and solar panel integration with USB output. IP54-rated port housing. Cable routing engineered for 10,000+ flex cycles. Power bank pocket dimensioned for 10,000–20,000mAh units. Charging and anti-theft systems are compatible in a single product construction.
MiaSolé CIGS thin-film flexible solar panels at 17.4% conversion efficiency — the highest specification available for bag integration. Integrated into the outer panel surface without adding structural rigidity or compromising carry comfort. Dual USB output for simultaneous multi-device charging. Suited to outdoor backpacks, expedition bags, and eco-tech brands where off-grid charging is a primary product proposition.
PA/PE laminate compression bags in five standard sizes (S to XXL). Dual-seal one-way valve batch-tested for 24-hour hold at 50kPa. Double-channel colour-indicator zipper seal. Roll-compression and vacuum-pump compatible. Full custom print, valve colour, and retail or FBA-ready packaging. MOQ from 500 units unprinted, 1,000 units custom print.
Built-in UV-C sterilisation chamber integrated into a functional crossbody, sling, or compact carry bag. Sterilises personal items via UV-C light exposure within a sealed internal chamber. Positioned for health and wellness brands, medical-adjacent product lines, and travel-health segments.
Kingsons’ technology systems are designed with combination in mind. The most commercially successful tech bags in Kingsons’ OEM portfolio integrate two or more systems — because the product story becomes significantly stronger when a single bag solves multiple problems simultaneously.
The most ordered combination in Kingsons’ tech bag portfolio — exemplified by the ClickPack Pro. A bag that keeps your belongings safe and your devices powered covers the two most common concerns of the urban traveller and daily commuter. The two systems integrate cleanly: the USB port and cable routing do not interfere with the back-access panel or anti-theft compartment layout.
The premium travel backpack combination — off-grid charging capability, device power management, and full security integration. Suited to the expedition, adventure travel, and long-haul travel market where all three functions are simultaneously relevant.
A tech-forward school or student backpack — USB charging for device-dependent students, Bounce-Bounce spine-support system for daily carry health. Two technologies addressing two distinct pain points of the same user in a single product.
Security technology in a GRS-certified recycled material shell — for brands whose customer base cares about both product security and material sustainability. The technology integration does not constrain material choice.
Our technology is developed in-house, patented by Kingsons, and refined through commercial production runs — including the ClickPack Pro’s international market launch. For OEM clients, this brings you:
ISO 9001Quality Management
GRSGlobal Recycled Standard
BSCISocial Compliance
Yes. Kingsons’ 80-person R&D team accepts custom technology development briefs. If your concept does not exist in the current patent portfolio, the R&D team will assess feasibility, estimate development timeline and cost, and propose a development and production agreement. Custom development typically involves a non-recurring engineering (NRE) fee and a minimum production commitment, in exchange for patent co-ownership or exclusive use rights. The first conversation is a feasibility discussion — contact the team with your concept.
All technology functions are tested on 100% of production units — not sampled. USB port continuity is tested at a production-line test fixture. Vacuum valve integrity is batch-tested. RFID shielding effectiveness is verified by batch. QI coil function is tested per unit. The functional defect rate is documented per production run and available to OEM clients on request.
Yes, in most cases. Exclusivity is available on a category and/or regional basis. If a technology is already in active use by another OEM client in your target market and segment, Kingsons will advise before a production agreement is signed. Exclusivity terms are negotiated and documented in the production agreement.
Tech-integrated samples typically take 10–15 business days — slightly longer than standard bag samples due to component sourcing and integration testing. Multi-system products (e.g. anti-theft + USB charging) allow 12–18 business days. A photo and video walkthrough is provided before physical dispatch for remote approval.
It depends on the technology and integration tier. Entry-level integration — a USB port and cable, or an RFID-blocking pocket — adds modest unit cost. Multi-system integration adds more, appropriately for a product positioned at a premium price point. Kingsons provides transparent, itemised costing at the quotation stage showing the base bag cost and each technology element’s cost contribution separately. No hidden integration charges.
Yes. Technology integration does not constrain material choice. Kingsons produces anti-theft and USB charging backpacks in GRS-certified RPET and recycled nylon constructions. The GRS certification covers the material production — the technology integration is separate from the material certification. A tech bag can carry both a GRS recycled content claim and a patented technology integration in the same product.
Five technology systems. 800+ patents. 80 engineers. 29 years of manufacturing experience proving every system in commercial production. The infrastructure to take a tech bag brief — from concept to certified, market-ready product — already exists at Kingsons. Your brand’s next tech product starts with one conversation.